Assembly Instruction

ManualsBrandsFreedom ManualsAccessoriesFreedom Pezzaro ETU

Assembly Instructions

Pezzaro ETU

Page 1

Care Information:

Periodically check and re-tighten all fasteners. Wipe down surfaces using a clean cloth weekly. Avoid direct sunlight.

Parts

Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.

Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.

It is recommended that assembly is done on a soft surface like carpet to avoid any damage.

If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588

(Customers outside Australia should contact their closest Freedom store.)

Step 1.

Alrea dy glue d

to gla ss

Shelf rods

Pla stic

wa she rs

Toughene d

gla ss shelf

Me ta l disc s

for bottom

Four of these disc s c ome glued to

the bottom of the ta ble.

Sc rew a rod into ea c h of the four

disc s on the bottom of the ETU.

Tighten firmly by ha nd.

Pla c e a pla stic wa sher onto the

threa ded ends of ea c h of the

four rods.

Pla c e a gla ss she lf over the

threa ded ends of the four

rods.

Pla c e a nother pla stic wa sher onto

the thre a de d ends of the four rods,

on the othe r side of the gla ss.

Sc rew ea c h of the four disc s onto

the thre a de d ends of the rods.

Tighten firmly by ha nd.

For easiest assembly, turn ETU on its on carpeted floor, leaving the white edge-protection rubber on.

Part A (Discs) are already attached to the ETU.

Part E x 4

Part A x 4

Part B x 4

Part C x 8

Part D x 1

Step 2.

Step 4.

Step 3.

Step 5.