Assembly Instruction

Assembly Instructions
Shiri Leaning Shelves
Page 1
Care Information:
Periodically check and re-tighten all fasteners. Wipe down surfaces using a clean cloth weekly. Avoid direct sunlight.
Hardware
Additional Hardware
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on 1300 135 588
(Customers outside Australia should contact their closest Freedom store.)
Step 1.
Part B x 2Part A x 2 Phillips Screwdriver (Not Supplied)
Part A
Part B
Finished.
!
Important Installation Information
As different walls require different
fasteners, the fixings required to attach
this product to the wall have not been
included. Please consuklt a hardware
store for advise on the correct fixing to
use