Assembly Instruction

Page 1 of 3Freedom Customer Service: 1300 135 588www.freedom.com.au
X-Ray Desk
23287648
Thank you for purchasing the X-Ray Desk. Before you begin to assemble your new piece of furniture,
please check to ensure that all hardware and parts have been supplied. This page lists all contents
included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.
Hardware (Supplied)
Parts
Care Information
Periodically check and re-tighten any fasteners. Avoid direct sunlight. Dust the surface weekly using a
soft cloth. Please note that metal surfaces with everyday use, you must expect some visual signs of wear
on the surface of the product. It is important to remove moist substances immediately. Remove stains
with a soft cloth to avoid marks on the surface.
The glass used in this product is known as tempered glass. Although it is up to four times tougher than
regular glass, it is not unbreakable. Tempered glass should be cared for like normal glass. Clean Glass
using a recognised glass cleaning product, avoid any overspray. Careless handling or use sometimes
produces damage which may not be visible to the eye. Damaged glass may spontaneously shatter if
subjected to thermal or mechanical stress. Avoid dropping objects on the glass. Do not allow hard or
pointed objects to come into contact.
Part B x 1 Part C x 1 Part E x 1Part D x 4Part A x 1
Part 5 x 1
Part 1 x 1
Part 4 x 2
Part H x 4
Part 3 x 1
Part G x 6
Part F x 6
Part 2 x 1