Manualshelf

4-bay Desktop Network Storage USER'S MANUAL freeStor 4020

ManualsBrandsFreedom9 ManualsNetwork Card4020
101102103104105106107108109110
103
**
Figure B-5: Disk Change Notification Page – RAID Failure
Take the appropriate action:
• Scan the storage system again and update the information on the page: Click “Scan”.
• To re-install the same disk: Click “Shut Down”. After the storage system shuts down,
re-install the same disk and then restart the system.
Note: If you removed multiple disks, be sure to re-install them in the opposite
order than you removed them.
• To reconfigure the storage system using the available disks: Click “Reconfigure
Disks” and complete the system setup pages.
Caution: Reconfiguring the storage system deletes all user information and all
data on all the disks.
A.3 Swapping hard disks
If you are using RAID 5 + spare or RAID 10, you can move the hard disks from one slot to
another whether or not the storage system is running. However, if you do this when the