4-bay Desktop Network Storage USER'S MANUAL freeStor 4020

86
2. In the Protected disk list, select a disk whose backup resides on the storage system whose
recovery CD password you want to change.
To double-check your selection, click “Status”. The name of the storage system appears in
the Backup location area. Then click “Restore” to return to the Restore page.
3. Click “Recovery CD Password” to open the dialog box to change the password (Figure
4-18).
Figure 4-18: Changing Recovery CD Password Dialog
4. In the Recovery CD password text box, enter the desired password. This password must
be 12-16 characters long.
5. In the Retype your password text box, enter the password again.
6. Click “OK”.
4.3 System Restoration with DiskSafe Express
With DiskSafe Express, there are several ways to recover data from your backups. The best
method to use depends on what you want to do:
• Recovering selected folders, files, or sections of files: If you accidentally permanently
deleted a folder or file that you want to recover, or if you just want to retrieve some
information from a file that you changed, you can access the backup that contains the
desired data and copy it to your local disk.
You can also use this procedure to try out different “what if” scenarios—for example,
changing the format of the data in a file—without adversely affecting the data on your local
disk.
For more information, refer to Section
4.3.1.