freeView Power 80 Remote Power Control P/N: KPM-008M User's Manual

Obtain an IP Address: Select whether the unit uses the IP address entered manually in the

fields above, or obtains an IP address from a DHCP server.

Primary DNS Server: The primary DNS server used for name resolution.

Secondary DNS Server: The backup DNS server used for name resolution in the event the

primary DNS server is unavailable.

Connection Type: Determine the connection speed and duplex of the Ethernet port (Auso

Sense, 10Mbps Half-Duplex, 10Mbps Full-Duplex, 100Mbps Half-Duplex, 100Mbps Full-

Duplex). The recommended settings is “Auto Sense”.

Services Provider: The dynamic DNS service provider used (None, 3322.org, dhs.org,

dyndns.org, myddns.com).

Domain Name: Your registered DDNS domain name.

Use External STUN server to get Public IP to register: Set whether a STUN server should be

used to retrieve the public IP address of the device.

Primary STUN Server IP: If a STUN server is used, this is the primary IP address of the STUN

server.

Secondary STUN Server IP: If a STUN server is used, this is the secondary IP address of the

STUN server in the event the primary server is unavailable.

When Connection should be made: Determine when the unit should connect to a PPPoE

internet connection (Disabled, Connect Always).