Manualshelf

freeView Power 80 Remote Power Control P/N: KPM-008M User's Manual

ManualsBrandsFreedom9 ManualsSwitchFREEVIEW 80
21222324252627282930
freeView Power 80 User Manual
19
4.2.5 SNMP
The SNMP page (Figure 20) allows you to manage the SNMP access rights to the device. By
default, read/write access is allowed from any computer on the network. It is recommended to
change this as soon as possible for security purposes.
Figure 20 – SNMP Page
System Name: The name given to the unit for identification purposes which will be displayed on
the SNMP client.
System Contact: The name of the person to contact in case there are problems with the unit
which will be displayed on the SNMP client.
Location: The location of the unit which will be displayed on the SNMP client.
Manager IP Address: Restricts access to the unit via SNMP from the specified IP address
range. * is used as a wildcard.
Community: The SNMP community name that the device belongs to. Only SNMP clients with