User Manual

87| USER MANUAL
LOSS OF RADIO CONTROL SIGNAL
1. Controller Battery CHECK
2. Controller Antenna REPOSITION
3. Mode Switch POSITION
4. Home Switch RETURN-TO-HOME
AMPLIFICATION
Loss of Signal (LOS) can occur if the radio controller stops transmitting a signal,
or if ALTA is too far away to receive it. In the event ALTA detects a LOS, it will
automatically execute a Return-to-Home or Autoland as configured in the App.
However, it is always recommended to attempt to regain signal link with ALTA to
keep the pilot in control of the aircraft.
Move the antenna orientation for best signal strength. Ensure the transmitter
antenna matches the direction of the receiver antennae. Move the transmitter away
from objects to get a clear line-of-sight to ALTA.
Setup the Mode and Home switches to enable Return-To-Home so ALTA will
continue to approach the starting point and have a higher likelihood of regaining
signal reception.
NOTE
If efforts to regain control signal are unsuccessful, ALTA
will begin the Return-To-Home and Autoland sequence.