User Manual

96| AIRCRAFT FLIGHT MANUAL
AFTER LAST FLIGHT
1. Propellers FOLD and PLACE inline with booms
2. Prop Protectors INSTALL
3. Boom Latches UNLOCK
4. Booms FOLD
5. Boom Retention Clips EXTEND
6. Payload REMOVE
7. ALTA 6 INSERT into case
AMPLIFICATION
Fold propeller blades and install foam prop proptectors to decrease the risk of
damaging the propellers while packing ALTA 6. Keeping ALTA 6 on the payload or
landing gear easily facilitates the folding process as ALTA 6 may be turned on the
Toad In The Hole adapter while folding the propellers and booms. Folding the booms
in opposing pairs can help maintain balance and reduce the likelihood of tipping.
Make sure that the handle is aligned front-to-back with the battery leads facing to
the right when putting ALTA 6 in the included case. Pay special attention to optional
accessories if installed (FPV camera and Tx) to make sure they are located in the
foam cavity properly.