User's Manual

USING YOUR HEADSET FOR THE FIRST TIME
17
Step Five: Establish Link (Automatic)
Once you have paired your headset to an adapt-
er, the two devices can establish a communica-
tion link. This occurs automatically immediately
after pairing, and the link persists as long as the
headset remains within the Personal Communi-
cation Bubble (see definition above). When your
headset moves outside of the bubble, the link is
lost, and the unit returns to Seek Mode.
While in Seek Mode, the headset is attempting
to locate the adapter to which it is paired (see
above definition). The adapter LED will flash red
and you will hear a repeating short double tone
from the headset speaker. This will persist until
the unit exits Seek Mode by either:
• Re-establishing the link with the adapter
with which it is paired - when this occurs the
adapter LED will resume flashing green, or
• Entering Sleep Mode - this occurs when no
link is established for five (5) minutes.
Step Six: Adjust Headset Volume and Fit
The headset has eight different volume levels.
Use the Volume Up and Volume Down keys on
your headset to increase or decrease the volume
level. Depress Volume Up or Volume Down once
for each level you want the volume to increase
or decrease.
Select the ear gel that provides the most
comfortable and secure fit, according to your
personal preference.
CAUTION
If the volume buttons are held down continu-
ously to increase or decrease the volume levels,
after six seconds, it will switch into VOX mode.
Step Seven: Ending Use
There is no On/Off switch on the headset. To
turn off the headset, you can either switch the
adapter toggle switch to the OFF position (see
diagram) or turn the portable radio off. Once
you have powered off the adapter, the link will
be broken and the headset will move into Seek
Mode. When the link has been broken for five (5)
minutes, the headset will move into Sleep Mode,
and will thus power off.