Use and Care Manual

0706
●
FEATURES
360 ADJUSTABLE EXHAUST
OIL-FREE DESIGN
COMFORT-GRIP HANDLE
ERGONOMICALLY ENGINEERED BODY
°
Allows user to direct air away from .
For less maintenance.
For long lasting durability.
For increased comfort and control.
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
AIR FILTER
ADJUSTABLE DEPTH
Rugged and Comfortable resulting in a light-
weight tool great for extended use.
Keeps interior components debris free,
extending tool life.
Depth is easily adjustable for various
applications.
face
●
●
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
connecting to an air source.
WARNING:
!
Connect the tool to the air source.
Push down on the latch button(G). Pull back on
the magazine cover(H).
Insert a stick of fasteners into the magazine
rail(I). Make sure the pointed ends of the
fasteners are resting on the bottom ledge of the
magazine when loading. Make sure the
fasteners are not dirty or damaged.
Push the magazine cover(H) forward until latch
button pops up.
●
●
●
⒈
⒉
⒊
⒋
LOADING FASTENERS
●
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
WARNING:
!
UNPACKING
This tool has been shipped completely
assembled.
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please
call 1-888-669-5672.
●
●
●
●
●
FEATURES
SPECIFICATIONS
REQUIRES:
AIR INLET:
MAGAZINE CAPACITY:
WEIGHT:
MAXIMUM PRESSURE:
PRESSURE RANGE:
4.30 SCFM with 100 fasteners per
minute @ 90 psi
1/4 inch NPT
100 fasteners, 20 gauge
3.37 lbs
110 psi
70 psi 110 psi–
PIN SIZE RANGE:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
WARNING:
!
Compatible with all 20 gauge L cleats from 1 in.
to 1-1/4 in. .
HTTP://WWW FREEMANTOOLS COM 1-888-669-5672.. HTTP://WWW FREEMANTOOLS COM 1-888-669-5672..
MODEL:PF20GLCN MODEL: PF20GLCN
1" to 1-1/4 " (25mm - 32mm)
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
OPERATION
The tool is packed with another regular nose
cover with which can be replaced.
CHANGE THE NOSE COVER
Disconnect the tool from air source.
Remove fasteners from the tool. Failure to do
so will cause the fasteners to eject from the
front of the tool.
Pull up on the latch(B) and open the flooring
nose cover (C)
Remove the O-ring (D) and pin (E)
Remove the flooring nose cover(C).
Pull the regular nose cover (F) on the nose of
the nailer.
Put the pin (E) and O-ring (D) back.
Push the latch back to the nose cover on the
nailer's nose.
1.
2.
3.
4.
5.
6.
7.
8.
Latch (B)
Pin (E)
O-Ring (D)
Flooring nose
cover (C)
Flooring nose
cover (C)
Magazine rail (I)
Magazine cover (H)
Latch button (G)
Put the pin (E) and
O-ring (D) back
32mm
1-1/4”
25mm
1”
32mm
1-1/4”
25mm
1”
0.193”
4 9mm.
0.252”
6.4mm