Owner's Manual

12
14. Have a second person hold a Cabinet Base (1) in
the position shown. Insert a Right-Tab Insert (22)
into the indicated corner of the Cabinet Base.
Attach a Locking Caster (19) and the Right-Tab
Insert to the Cabinet Base with three 5/16” x
2 1/4” Button Head Bolts (57) and three 5/16”
Nylon Locknuts (50).
Attach a Left-Tab Insert (21) and a Non-Locking
Caster (20) to the indicated corner of the Cabinet
Base (1) in the same manner.
Repeat this step on the left side of the Cabinet
Base (1).
16. Have another person hold a Drawer Left Side
Panel (35) and a Drawer Right Side Panel (36) in
the positions shown. Align the flanges on the
edges of a Drawer Rear Panel (34) with the indi-
cated flanges on the Side Panels, and slide the
Drawer Rear Panel down into the flanges on the
Side Panels.
Align the flanges on the edges of a Drawer Bottom
(33) with the indicated flanges on the Side Panels
(35, 36). Slide the Drawer Bottom into the flanges
on the Side Panels. Make sure the three tabs
on the Drawer Bottom slide onto the indicated
lip on the Drawer Rear Panel (34).
Repeat this step for the other three drawers.
15. Identify the Right Post Assembly (A), which has
the Door Lock Bracket (29) attached to it. Orient
the Right Post Assembly as shown, and attach it
to the Cabinet Base (1) with two 5/16” x 2 1/4”
Button Head Bolts (57).
Attach the Left Post Assembly (B) to the
Cabinet Base (1) in the same manner.
Set the Cabinet Base (1) on the casters.
See the inset drawing. Attach the Drawer Lock
Spring (30) to the Drawer Lock Pivot (29) and the
indicated Drawer Lock Bracket (28).
Drawer Cabinet
15
57
57
29
29
A
B
1
1
Door
Stop
50
50
57
57
22
21
20
19
50
50
14
Do not put a bolt
in this hole
Do not put a bolt
in this hole
34
35
36
33
Tabs
Flanges
Flanges
Flange
Flanges
Lip
16
30
28