Owner's Manual

16
23. With the help of a second person, remove the
Table Top (46) from the box and stand it on the
Table Legs (45).
Have a second person hold the Table Brace (47)
against the Table Legs (45) and the Table Top
(46). Attach the Table Brace to the indicated Table
Leg with two 5/16” x 3/4” Hex Head Screws (61)
and two 5/16” Star Washers (58). Do not tighten
the Hex Head Screws yet. Attach the Table
Brace to the other Table Leg in the same manner.
24. Attach the Backsplash (48) to the Table Top (46)
and the Table Brace (47) with five 1/4” x 2” Hex
Head Screws (59) and five 1/4” Star Washers
(51) as shown.
See step 22 and tighten the 1/4” x 1 3/16” Lag
Screws (60). See step 23 and tighten the 5/16” x
3/4” Hex Head Screws (61).
25. Make sure all parts of the garage organizer
are properly tightened. Note: Some hardware
may be left over after assembly is completed.
24
47
45
46
59
59
59
59
46
48
47
59
51
51
51
58
58
61
23