Owner's Manual

6
3. Set the Cabinet Base (1) in the position shown.
Insert a Shelf Bracket (31) into the indicated slot
in one of the Short Rear Posts (3) (see the inset
drawing). Secure the Shelf Bracket at the desired
height with a 1/4” x 1 1/2” Cap Screw (56). Insert
a Shelf Bracket into each of the three remaining
Posts (3, 4, and 5). Secure each Shelf Bracket
with a 1/4” x 1 1/2” Cap Screw. Make sure all
four Shelf Brackets are at the same height.
2. Identify a Short Front Right Post (5) and a Short
Front Left Post (4); each of these Posts has a lip
on one side and is labeled with a sticker.
Attach the Short Front Right Post (5) to the
Cabinet Base (1) with a 5/16” x 2 1/4” Button
Head Bolt (57). Attach the Short Front Left Post
(4) and two Short Rear Posts (3) to the Cabinet
Base in the same manner.
1
57
5
3
3
3
3
5
4
1
31
Slot
56
4
Lip
Lip
3
2
31
3
Sticker