Owner's Manual

ADJUSTING THE BACKREST

To adjust the angle of the Backrest (19), pull the

indicated Bracket Knob (13), raise or lower the

Backrest, and then release the Bracket Knob into

one of the adjustment holes in the Backrest Bracket

(7). Move the Backrest upward or downward to

make sure that the Backrest Knob is engaged in

one of the adjustment holes.

ADJUSTING THE SEAT

To adjust the angle of the Seat (18), pull the indi-

cated Bracket Knob (13), raise or lower the Seat,

and then release the Bracket Knob into one of the

adjustment holes in the Seat Bracket (not shown).

Move the Seat upward or downward to make

sure that the Backrest Knob is engaged in one of

the adjustment holes.

ADJUSTMENT

The steps below explain how the weight bench can be adjusted. Make sure that all parts are properly tightened

each time the weight bench is used. Replace any worn parts immediately. The weight bench can be cleaned with

a damp cloth and a mild, non-abrasive detergent; do not use solvents to clean the weight bench.