Owner's Manual
6
ASSEMBLY
• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Due to its weight and size, the weight bench
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materialsuntilyounishallassemblysteps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tool(s):
one adjustable wrench
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1. Orient the Stabilizer (2) so that the warning
decals are in the position shown.
Attach the Stabilizer (2) to the Frame (1) with two
M10 x 55mm Screws (27). Start both Screws,
and then tighten them.
1
2
1
27
Warning
Decals
2. Identify the Right Seat Frame (8), the Left Seat
Frame (9), and the Seat Bracket (10). Orient the
three parts as shown.
Attach the Left Seat Frame (9) to the Seat
Bracket (10) with two M8 x 42mm Bolts (11), two
M8 Washers (4), and two M8 Locknuts (3); do
not tighten the Bolts yet.
Attach the Right Seat Frame (8) to the Seat
Bracket (10) in the same way.
8
9
11
11
4
4
3
10
2