Owner's Manual

7
3. Identify the Right Backrest Frame (5), the Left
Backrest Frame (6), and the Backrest Bracket
(7). Orient the three parts as shown.
Attach the Left Backrest Frame (6) to the
Backrest Bracket (7) with two M8 x 42mm Bolts
(11), two M8 Washers (4), and two M8 Locknuts
(3); do not tighten the Bolts yet.
Attach the Right Backrest Frame (5) to the
Backrest Bracket (7) in the same way.
3
5
6
11
11
4
4
3
7
4. Pull each Adjustment Knob (13), and insert the
Seat Bracket (10) and the Backrest Bracket (7)
into the two slots in the top of the Frame (1).
Release the Adjustment Knobs into adjustment
holes in the Seat Bracket and the Backrest
Bracket.
Align the brackets on the Seat Frames (8, 9) and
the brackets on the Backrest Frames (5, 6) with
the welded tube on the Frame (1), as shown in
the inset drawing.
See the inset drawing. Attach the Seat Frames
(8, 9) and the Backrest Frames (5, 6) to the
Frame (1) with an M12 x 132mm Bolt (25) and
an M12 Locknut (26). Do not overtighten the
Locknut; the Seat Frames and the Backrest
Frames must be able to pivot.
4
1
8
6
10
13
13
7
9
5
25
26
1
5
8
9
6