Owner's Manual

11
12. Identify the Right and Left Safety Spotters (17,
18).
Slide the Left Safety Spotter (18) and a Slide
Bumper (39) onto the left Guide Rod (8). Set the
hook on the Safety Spotter over a lower hook
knob on the Left Front Upright (90).
Repeat this step with the Right Safety Spotter
(17), the right Guide Rod (8), and the Right
Front Upright (4).
13. Orient the Gliders (15) as shown.
Slide the right Glider (15) onto the right Guide
Rod (8).
Slide the left Glider (15) onto the left Guide Rod
(8).
14. Press four 60mm Square Inner Caps (55) into the
Front Top Frame (9).
15. Attach a Short Guide Bumper (29) and the left
Guide Rod (8) inside the Front
T
op Frame (9) with
an M10 x 77mm Bolt (85), two M10 Washers
(65), two 7mm Spacers (47), and an M10 Nylon
Locknut (64).
Do not tighten the Locknut yet.
Repeat this step on the other side of the Front
Top Frame (9).
12
17
4
Hook
LeftRight
Hook
Knob
18
39
39
13
15
15
14
55
55
55
55
9
15
85
9
47
65
65
64
47
29
8
8
8
8
8
90
LeftRight