Owner's Manual

12
16. Attach the Front Top Frame (9) to the Left Front
Upright (90) with two Top Joint Plates (26), four
M10 x 84mm Bolts (75), and four M10 Nylon
Locknuts (64).
Make sure the Joint Plates are
oriented as shown. Do not tighten the
Locknuts yet.
Repeat this step with the Right Front Upright
(not shown).
18. Press three 60mm Square Inner Caps (55) into
the Rear Top Frame (10).
19.
Attach two Short Guide Bumpers (29) and the two
Carriage Guides (7) inside the Rear
T
op Frame
(10) with two M10 x 77mm Bolts (85), four M10
Washers (65), four 7mm Spacers (47), and two
M10 Nylon Locknuts (64).
Do not tighten the
Locknuts yet.
17. Press two 48mm Round Inner Caps (31) into the
Weight Carriage (14). Slide two Weight Tube
Bumpers (30) onto the Weight Carriage.
Slide two Slide Bumpers (39) and the Weight
Carriage (14) onto the Carriage Guides (7) as
shown.
16
26
Narrow
Side
64
64
75
75
9
90
26
17
7
39
14
30
30
31
31
39
18
10
55
55
55
19
10
85
85
65
65
65
65
64
47
47
29
29
7