Owner's Manual

13
20. Attach the Rear Top Frame (10) to the Center
Upright (5) with two M10 x 77mm Bolts (85), two
M10 W
ashers (65), and two M10 Nylon Locknuts
(64).
Do not tighten the Locknuts yet.
Attach the Rear Top Frame (10) to the Front Top
Frame (9) with two M10 x 77mm Bolts (85), two
M10 Washers (65), and two M10 Nylon Locknuts
(64). Do not tighten the Locknuts yet.
22. Identify the Left and Right Fly Arms (11, 12).
Press a Round Slanted Inner Cap (91) into the
Left Fly Arm (11).
Lightly grease an M12 x 108mm Bolt (72) and the
Butterfly Bushings (56) in the Left Fly Arm (11)
with the included grease packet.
Attach the Left
Fly
Arm to the Butterfly Frame (13) with the Bolt,
an M12 Nylon Locknut (123), and two M12 Nut
Covers (93).
Make sure that the indicated rod
is on the outside of the Butterfly Frame .
Repeat this step with the Right Fly Arm (12).
21. Attach the Butterfly Frame (13) to the Center
Upright (5) with two M10 x 80mm Bolts (84), two
M10 Washers (65), and two M10 Nylon Locknuts
(64).
20
85
85
65
65
5
9
65
64
64
64
10
65
21
84
65
65
64
64
5
84
22
93
72
13
12
93
Grease
Rod
Grease
Grease
123
1
1
56
91
13