Owner's Manual

15
27. Wrap the Butterfly Cable (61) under a 90mm
Pulley (50). Attach the Pulley to the Small Double
“U”-bracket (44) with an M10 x 45mm Bolt (73)
and an M10 Nylon Locknut (64).
29. Attach the Butterfly Cable (61) to the Left Fly Arm
(11) with an M8 x 60mm Shoulder Bolt (71) and
an M8 Nylon Locknut (86). Make sure the flat
edge of the eyelet on the Cable is against the
Fly Arm.
30. Locate the Carriage Cable (62). Attach the
Cable inside the Rear
T
op Frame (10) with an
M10 x 77mm Bolt (85), two M10 Washers (65),
and an M10 Nylon Locknut (64).
28. Wrap the Butterfly Cable (61) over a “V”-pulley
(51). Attach the “V”-pulley and a Large Cable
Trap (52) to the Center Upright (5) with an M10 x
58mm Bolt (81) and an M10 Nylon Locknut (64).
Make sure the Cable Trap is oriented to hold
the Cable in the groove of the “V”-pulley.
27
28
29
30
61
50
64
73
44
61
81
52
51
64
5
71
61
86
11
85
65
65
64
10
62
Flat
Edge