Owner's Manual

16
31. Wrap the Carriage Cable (62) under a 90mm
Pulley (50). Attach the Pulley to the Large Double
“U”-bracket (43) with an M10 x 45mm Bolt (73)
and an M10 Nylon Locknut (64).
33. Attach the Carriage Cable (62) inside the Weight
Carriage (14) with an M10 x 66mm Bolt (76), two
M10 Washers (65), two 22mm Spacers (46), and
an M10 Nylon Locknut (64).
34. Locate the Long Cable (63). Route the Cable up
through the Rear
T
op Frame (10) and over a
90mm Pulley (50). Attach the Pulley inside the
Top Frame with an M10 x 77mm Bolt (85), two
M10 W
ashers (65), two 17mm Spacers (49), and
an M10 Nylon Locknut (64).
32. Wrap the Carriage Cable (62) over a 90mm
Pulley (50). Attach the Pulley inside the Top
Frame (10) with an M10 x 77mm Bolt (85), two
M10 W
ashers (65), two 17mm Spacers (49), and
an M10 Nylon Locknut (64).
31
32
33
34
62
50
64
73
43
10
49
49
50
62
65
65
85
64
62
64
65
65
76
14
46
46
50
49
49
63
10
85
65
65
64