Owner's Manual

18
40. Route the Long Cable (63) through the Center
Upright (5) and under a 90mm Pulley (50). Attach
the Pulley inside the indicated bracket on the
Upright with an M10 x 45mm Bolt (73) and an
M10 Nylon Locknut (64).
42. Slide a Clip Cover (53) onto the Long Cable (63).
Hold an M8 Nylon Locknut (86) inside a Clip (54),
and insert the Long Cable (63) into the Clip and
Locknut. Insert a screwdriver between the
Locknut and the Clip. Rotate the screwdriver,
Clip, and Locknut together until two threads of the
Cable show past the Locknut.
Slide the Clip Cover (53) over the Clip (54).
43. Attach the Backrest (20) to the Center Upright (5)
with two M6 x 76mm Screws (69) and two M6
Washers (67).
41. Attach a 90mm Pulley (50) inside the bracket on
the Center Upright (5), and over the Long Cable
(63), with an M10 x 45mm Bolt (73) and an M10
Nylon Locknut (64).
40
41
42
43
63
50
64
73
Bracket
5
63
50
64
73
5
63
53
86
54
69
69
67
67
20
5