Owner's Manual

19
44. Identify the Right and Left Fly Pad (21, 22). Note
that the holes are not centered in the pads (see
the inset drawing).
Attach the Left Fly Pad (22) to the Left Fly
Arm
(11) with two M6 x 20mm Screws (70).
Attach the Right Fly Pad (21) to the Right Fly
Arm (12) in the same manner.
46. Attach the Bench Stabilizer (95) to the Bench
Frame (94) with two M10 x 20mm Bolts (127) and
two M10 Washers (65).
Attach the two Bench Knobs (118) to the Bench
Frame (94).
47. Attach the Leg Lever Bumper (109) to the Seat
Frame (97) with an M4 x 16mm Self-tapping
Screw (122) and an M5 Washer (121).
Attach the Seat Bracket (120) to the Seat Frame
(97) with two M10 x 75mm Bolts (125) and two
M10 Nylon Locknuts (64).
45. Press two 63mm Round Outer Caps (116) onto
the Bench Stabilizer (95).
Attach the two Wheels (117) to the Bench
Stabilizer (95) with two M10 x 46mm Bolts (126)
and two M10 Nylon Locknuts (64).
44
45
46
47
22
22
70
11
12
21
21
95
64
64
117
117
126
126
116
116
95
94
118
118
65
65
97
109
121
120
64
125
122
127
Bench Assembly