Owner's Manual

22
54. Attach the Seat (105) to the Seat Frame (97) with
four M6 x 20mm Screws (70).
56.
Attach a Curl Bumper (111) to the Curl Bar (101)
with an M4 x 16mm Self-tapping Screw (122) and
an M5 Washer (121).
Attach the Pin (1
12) to the Curl Bar (101) with an
M4 x 16mm Self-tapping Screw (122).
57. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
following page.
55. Attach the Curl Pad (104) to the Curl Post (103)
with two M6 x 20mm Screws (70).
54
55
56
105
97
70
104
103
122
122
112
101
121
111
70