Owner's Manual

8
6. Attach the Center Upright (5) to the Center Base
(2) with two M10 x 80mm Bolts (84) and two M10
Nylon Locknuts (64).
Do not tighten the
Locknuts yet.
6
5
64
84
2
7.
Press a 48mm Round Inner Cap (31) into a
Storage
T
ube (27).
Attach the Tube to a Support
(6) with an M10 x 90mm Bolt (78) and an M10
Washer (65). Slide a Weight Tube Bumper (30)
onto the Storage
T
ube.
Attach another Storage Tube (27) to the
Support (6) in the same manner
.
Attach two Storage Tubes (27) to the other
side of the other Support (6) in the same man-
ner
.
7
31
31
27
30
65
6
27
30
78