Owner's Manual

13
14. Grease the bottom of the Right Adjustment
B
racket (24), and slide the Right Arm (23) onto
the Right Adjustment Bracket. See the inset
d
rawing.
O
rient two Bracket Retainers (73) so
that the teeth bend downward. Tap the Bracket
Retainers onto the Right Adjustment Bracket.
A
ttach the Right Arm (23) to Right Adjustment
B
racket (24) with an M10 x 30mm Screw (54), an
M10 Lock Washer (86), an M10 Large Washer
(7), and a Bushing Cap (88). Do not overtighten
the Screw; the Right Arm must pivot easily.
Pull the Arm Knob (85), and engage it into a hole
in the Right Adjustment Bracket (24). Then, attach
an M6 x 15mm Bolt (44) to the Right Adjustment
Bracket with an Adjustment Bracket Bushing (35)
and an M6 Nylon Locknut (36).
Attach the Left Arm (22) to the Left
Adjustment Bracket (25) in the same way.
24
23
22
25
15. Identify the Right Arm Pad (89), which is labeled
with an “R.” Attach the Right Arm Pad to the Right
Arm (23) with two M6 x 16mm Screws (47).
Attach the Left Arm Pad (90) to the Left Arm
(22) in the same way.
47
89
90
22
23
16. Orient the Butterfly Backrest (69) as shown, and
attach it to the Center Upright (13) with two M6 x
90mm Screws (122) and two M6 Washers (40).
16
122
122
40
40
13
69
14
54
86
88
7
85
3
6
35
44
G
rease
15
73
24
Retainer Tool