Owner's Manual

18
28. Wrap the High Cable (81) around a Small Pulley
(74). Attach the Small Pulley to the Top Frame
(
17) with an M10 x 45mm Bolt (48) and an M10
Nylon Locknut (37).
2
8
48
29. Feed the High Cable (81) through the indicated
slot in the Top Frame (17). Wrap the High Cable
around a Small Pulley (74). Attach the Small
Pulley to the Top Frame with an M10 x 45mm
Bolt (48) and an M10 Nylon Locknut (37).
29
48
Slot
81
17
30. Wrap the High Cable (81) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) to the indi
-
cated bracket on the Weight Carriage Frame (18)
with an M10 x 48mm Bolt (121) and an M10
Nylon Locknut (37). Make sure that the Small
Cable Trap and the Half Pulley Guards are ori-
ented as shown.
30
121
37
91
91
18
Bracket
81
93
74
3
7
74
17
8
1
37
74