Owner's Manual

19
31. Wrap the High Cable (81) under a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(
93), and two Half Pulley Guards (91) to the sec-
ond hole from the top of the “U”-bracket (34) with
a
n M10 x 48mm Bolt (121) and an M10 Nylon
Locknut (37). Make sure that the Small Cable
Trap and the Half Pulley Guards are oriented
as shown.
31
121
32. Wrap the High Cable (81) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) to the indi-
cated bracket on the Weight Carriage Frame (18)
with an M10 x 48mm Bolt (121) and an M10
Nylon Locknut (37).
Make sure that the Small
Cable Trap and the Half Pulley Guards are ori-
ented as shown.
34
74
91
91
81
81
18
37
121
93
93
32
37
91
91
74