Owner's Manual

20
33. Feed the High Cable (81) through the indicated
slot in the Top Frame (17). Wrap the High Cable
a
round a Small Pulley (7). Attach the Small Pulley
to the Top Frame with an M10 x 45mm Bolt (48)
a
nd an M10 Nylon Locknut (37).
33
48
81
37
74
17
34. See the inset drawing. Insert the cabling rod
into the left Swivel Bracket (31) and the Top
Frame (17). Attach the cabling rod to the High
Cable (81). Then, pull the cabling rod and the
High Cable out of the Swivel Bracket.
Make sure
that the High Cable is under the indicated rod.
Wrap the High Cable (81) around a Small Pulley
(74). Attach the Small Pulley to the Top Frame
(17) with an M10 x 45mm Bolt (48) and an M10
Nylon Locknut (37).
34
17
17
31
48
Rod
37
81
Rod
81
74
Cabling
Rod
31