Owner's Manual

If you have questions about maintenance or troubleshooting, see HOW TO CONTACT CUSTOMER CARE

n page 2.

Regularly inspect and properly tighten all external parts of the recumbent bike. To clean the recumbent bike,

apply a small amount of mild multi-purpose cleaner to a 100 percent cotton cloth and wipe the console, screens,

and external surfaces. Do not spray cleaner directly onto the recumbent bike or use ammonia or acid-

based cleaners.

LEVELING THE RECUMBENT BIKE

If the recumbent bike rocks slightly during use, see HOW TO MOVE AND LEVEL THE RECUMBENT BIKE on

page 7.

SEAT ADJUSTMENT

To adjust the position of the seat, see HOW TO ADJUST THE SEAT on page 7.

SELECTING A SYSTEM OF MEASUREMENT

The console can display data using the standard system (miles and pounds) or the metric system (kilometers and

kilograms). To change the system of measurement, see step 4 on page 20.

PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly, see THE PULSE SENSOR on page 12.

TV TROUBLESHOOTING

If the TV in the Workout TV console does not function properly, make sure that the included power cord is fully in-

serted (see HOW TO CONNECT THE POWER CORD on page 7). The power cord must be used for the TV to be

operated.

If the TV picture is fuzzy, make sure that the correct connection setting is selected (see the user’s manual in-

cluded with the Workout TV console). In addition, make sure that the CATV cable is properly connected (see

HOW TO CONNECT A CATV CABLE on page 8).

MAINTENANCE AND TROUBLESHOOTING