Owner's Manual

5
Assembly requires two persons. Set the recumbent bike in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed.
HOW TO ASSEMBLE THE RECUMBENT BIKE
1. While a second person holds the Console (5) near
the Upright (4), insert the console wires downward
through the Upright.
Attach the bottom of the Console (5) to the Upright
(4) with four Console Mating Screws (57).
Be care-
ful to avoid pinching the console wires.
Console
Wires
Avoid pinching
the console
wires during
this step
57
57
1
2. Attach the back of the Console (5) to the Upright (4)
with two Console Mating Screws (57).
2
57
5
4
5
4