Owner's Manual

Console

Wires

Frame

Wires

2. Slide the Upright Screw Cover (47) onto the Upright

(3). Make sure that the Upright Screw Cover is

oriented as shown. Then, slide the Upright Screw

Cover upward to the top of the Upright.

While a second person holds the Upright (3) near

the Frame (1), connect the console wires to the

matching connectors on the frame wires.

Slide the Upright (3) onto the Frame (1). Attach the

Upright with four Upright Screws (85). Be careful

to avoid pinching the wires during this step.

Then, slide the Upright Screw Cover (47) down-

ward to the bottom of the Upright (3).

3. Attach the Seat (9) to the Seat Post (5) with three

Seat Screws (73).

Avoid pinching

the wires during

this step