Owner's Manual

8
DISPLAY DEFINITIONS
WARM UP
The console has a WARM UP mode designed to allow
ausertoadjusttheexercisebike,towarmup,andto
prepare for an actual ride. In a studio cycling class,
users can use this mode to warm up before the class
begins.
While the WARM UP mode is selected, the console
will provide instantaneous data in the left displays for a
user to reference. However, the console will not record
the elapsed time, will not show average values, and
will not save ride data to a USB drive.
ToexittheWARMUPmode,auserwillpressthe
STAGE button to enter the STAGE mode and begin the
ride.
STAGE
During the ride, the console will be in the STAGE
mode.
The STAGE mode can have 1 to 99 numbered stages.
To enter a new STAGE, a user will press the STAGE
button. The message banner will show the STAGE
number.
For each stage, the console will record the elapsed
time and distance, will show instantaneous data in the
left displays, and will show average values in the right
displays.
Ride data for each STAGE will also be saved in the
console memory for the RESULTS mode. If a user
inserts a USB drive into the USB port before entering
the STAGE mode, the ride data will also be saved to
the USB drive in the RESULTS mode.
RIDE
During the ride, a user can press the AVG/END button
to select the RIDE mode and view data for the entire
ride.
While the RIDE mode is selected, the console will
show the time and distance for the entire ride. The left
displayswillshowthemaximumvaluesachievedfor
the ride so far and the right displays will show the aver-
age values for the ride so far.
WATTS
IMPORTANT: The console will measure watts if it is
used with the power sensor. If the console is used
with the RPM sensor, the console will not measure
watts.
The console will measure and show a user’s power
output in WATTS. A watt is an instantaneous measure-
ment of power and is a product of two factors: force
and movement.
Whenauserridesanexercisebike,forceequates
to how hard the user pushes the pedals. Movement
equates to the user’s pedaling cadence—measured in
revolutions per minute (RPM).
A watt is the international standard unit for power.
However,poweroutputisoftenexpressedinhorse-
power as well. For reference, 746 watts is equal to 1
horsepower.