Owner's Manual
17
HOW TO TURN ON THE POWER
1. Plug in the power cord.
See HOW TO CONNECT THE POWER CORD on
page 14.
2. Move the power switch to the on position.
Locate the power
switch on the in-
cline trainer near
the power cord.
Press the power
switch into the on
position.
3. Insert the key into the console.
Note: The console can be set to be used without
the key. See step 6 on page 24 for instructions. If
the console has been set to be used without the
key, this step does not apply.
Find the key and the clip
on the console and at-
tach the clip to the waist-
band of your clothes.
Next, insert the key into
the console.
IMPORTANT: In an
emergency, the key
can be pulled from the console, causing the
walking belt to slow to a stop. Test the clip by
carefully taking a few steps backward; if the
key is not pulled from the console, adjust the
position of the clip.
HOW TO USE THE TOUCH SCREEN
The console features a tablet with a full-color touch
screen. The following information will help you become
familiar with the tablet’s advanced technology:
•Theconsolefunctionssimilarlytoothertablets.
You can slide or flick your finger against the screen
to move certain images on the screen, such as
the displays in a workout (see step 5 on page 19).
However, you cannot zoom in and out by sliding
your fingers on the screen.
•Thescreenisnotpressuresensitive.Youdonot
need to press hard on the screen.
•Totypeinformationintoatextbox,touchthetext
box to view the keyboard. To use numbers or other
characters on the keyboard, touch the ?123 but-
ton. To view more characters, touch the Alt button.
Touch the Alt button again to return to the number
keyboard. To return to the letter keyboard, touch the
ABC button. To use a capital character, touch the
button with an upward-facing arrow. To use multiple
capital characters, touch the arrow button again. To
return to the lowercase keyboard, touch the arrow
button a third time. To clear the last character, touch
the button with a backward-facing arrow and an X.
Key
Clip
On