Owner's Manual

OW TO USE THE MAINTENANCE MODE

The console features a maintenance mode that allows

ou to access information and to view and change var-

ous default settings. Follow the steps below to use the

maintenance mode.

Insert the key into the console.

See GETTING STARTED on page 15.

Hold down the ENTER button and the CLEAR

button simultaneously for two seconds to se-

lect the maintenance mode.

When the maintenance mode is selected, the

words MAINTENANCE MODE will appear in the

main display. The word HOURS and the total

number of hours that the INCLINE TRAINER has

been used will then be shown.

Press the ENTER button to view the total dis-

tance that the walking belt has moved.

Press the ENTER button again and set a maxi-

mum program time.

To set a maximum program time, press the + and

– buttons beside the ENTER button. The maxi-

mum program time can be up to 90 minutes.

Press the ENTER button again and select a

language.

The main display can display text messages in

any of five languages. To select a language, press

he + and – buttons beside the ENTER button.

Press the ENTER button again and set the

delay time for the timeout mode.

Any time that the INCLINE TRAINER is not used

for several minutes, the console will enter a time-

out mode and the words SELECT PROGRAM TO

BEGIN will appear in the main display. To set the

number of seconds before the console will enter

the timeout mode, press the + and – buttons

above the ENTER button. The delay time can be

from 15 to 120 seconds.

Press the ENTER button again to create the

CUSTOM programs.

The words CUSTOM PROGRAM will appear in

the main display.