Owner's Manual

17
E
nter your weight.
Next, the words ENTER WEIGHT and a weight
setting of 185 pounds will appear in the main dis-
play. To enter your weight, press the + and – but-
tons beside the ENTER button; hold down the
buttons to enter your weight quickly. When your
w
eight is shown, press the ENTER button.
Enter a program goal.
If you have selected the MANUAL TIME program,
the words ENTER TIME and a time setting of 15
minutes will appear in the main display. To
change the length of time that the program will
last, press the + and – buttons beside the ENTER
button. Then, press the ENTER button.
If you have selected the MANUAL
VERTICAL
DISTANCE program, the words ENTER VERTI-
CAL DISTANCE and a vertical distance setting of
500 feet will appear in the main display. To
change the vertical feet you want to walk or run
during your workout, press the + and – buttons
beside the ENTER button. Then, press the
ENTER button.
If you have selected the MANUAL CALORIE pro-
gram, the words ENTER CALORIES and a calo-
rie-burning goal setting of 100 calories will appear
in the main display. To change the approximate
number of calories that you want to burn during
your workout, press the + and – buttons beside
the ENTER button. Then, press the ENTER but-
ton.
Press the QUICK START
button to start the
program.
A moment after the button is pressed, the walking
belt will begin to move at 1 mph. Hold the handrails
and begin walking.
As you exercise, change the speed of the walking
belt as desired by pressing the SPEED + and –
b
uttons. Each time a button is pressed, the speed
setting will change by 0.1 mph; if a button is held
d
own, the speed setting will change in rapid incre-
ments. Note: After the buttons are pressed, it may
take a moment for the INCLINE TRAINER to
reach the selected speed setting.
To stop the walking belt, press the STOP button.
The time will begin to flash in the main display. To
restart the walking belt, press the QUICK START
button or the SPEED + button and then adjust the
speed as desired.
Change the incline of the INCLINE TRAINER as
desired.
To change the incline of the INCLINE TRAINER,
press the INCLINE + and – buttons. Each time a
button is pressed, the incline will change by 0.5%.
To change the incline quickly, press the QUICK-
TOUCH INCLINE buttons. Note: After the buttons
are pressed, it may take a moment for the IN-
CLINE TRAINER to reach the selected incline set-
ting.
Follow your progress with the matrix and the
main display.
See step 4 on page 16.
Measure your heart rate if desired.
See THE PULSE SENSOR on page 14.
When the program is completed, remove the
key.
Step onto the foot rails. Remove the key from the
console and put the key in a secure place.
When the INCLINE TRAINER is not in use, switch
the on/off circuit breaker near the power cord to
the off position and unplug the power cord.
10
9
8
7
6
5
4