Owner's Manual

9. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-

pet, place a mat beneath the treadmill.

8. Attach the Front Cover (17) to the Frame (22) with the

two Cover Screws (2) and four Front Cover Screws (16).

1. Unplug the power cord. Remove the four Console

Plate Screws (94) and the Console Plate (not shown).

Remove the five Display Mounting Screws (114) from

the back of the Basic Console (not shown), and remove

the Basic Console from the treadmill. Disconnect all

wires connecting the Basic Console to the treadmill.

2. Insert the wire harness, the TV cable, and the ground

wire into the bottom of the TV console assembly (A) as

you slide the TV Console assembly onto the bracket on

the Handrail (103). Connect the wire harness, the TV

cable, and the ground wire to the back of the TV

Console assembly. Make sure to connect the connec-

tors properly.

Align the indicated five holes in the back of the TV con-

sole assembly (A) with the five holes in the bracket on

the Handrail (103). Attach the TV Console assembly

with five Display Mounting Screws (114). Do not pinch

any wires.

Then, attach the TV Back Plate (135) to the TV console

assembly (A) with four Console Plate Screws (94).

Wire

Harness

Ground

Wires

TV Cable

135

103

114

If you purchase the Workout TV console, follow the steps below to assemble the console.