Owner's Manual

Before moving the treadmill, unplug the power

cord. Note: It may be necessary to disconnect a

CATV cable and a network wire from the treadmill,

depending on how far the treadmill will be moved.

Due to the size and weight of the treadmill, mov-

ing it requires two or three persons. Lift the indi-

cated end of the treadmill and roll the treadmill on

the front wheels. Carefully move the treadmill to the

desired location and then lower it back to the level

position.

CAUTION: To reduce the risk of injury, use ex-

treme caution while moving the treadmill. Do not

attempt to move the treadmill over uneven sur-

faces.

Lift

Here

Wheels

6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys

for adjustments. To protect the floor or carpet, place a mat beneath the treadmill.

5. After the treadmill is placed in the location where it will

e used (see HOW TO MOVE THE TREADMILL

below), make sure that both Rear Feet (38) and both

front Wheels (not shown) rest firmly on the floor. If the

treadmill rocks even slightly, turn the right Rear Foot

clockwise or counterclockwise until the rocking motion

s eliminated.

Note: The Power Cord Bracket (64) must be at-

tached at all times.

HOW TO MOVE THE TREADMILL