Owner's Manual

OW TO USE THE MAINTENANCE MODE

The console features a maintenance mode that allows

ou to access information and to view and change var-

ous default settings. Follow the steps below to use the

maintenance mode.

Insert the key into the console.

See GETTING STARTED on page 15.

Hold down the ENTER button and the CLEAR

button simultaneously for two seconds to se-

lect the maintenance mode.

When the maintenance mode is selected, the

words MAINTENANCE MODE will appear in the

main display. The word HOURS and the total

number of hours that the treadmill has been used

will then be shown.

Press the ENTER button to view the total dis-

tance that the walking belt has moved.

Press the ENTER button again and set a maxi-

mum program time.

To set a maximum program time, press the + and

– buttons beside the ENTER button. The maxi-

mum program time can be up to 90 minutes.

Press the ENTER button again and select a

language.

The main display can display text messages in

any of five languages. To select a language, press

he + and – buttons beside the ENTER button.

Press the ENTER button again and set the

delay time for the timeout mode.

Any time that the treadmill is not used for several

minutes, the console will enter a timeout mode

and the words SELECT PROGRAM TO BEGIN

will appear in the main display. To set the number

of seconds before the console will enter the time-

out mode, press the + and – buttons above the

ENTER button. The delay time can be from 15 to

120 seconds.

Press the ENTER button again to create the

CUSTOM programs.

The words CUSTOM PROGRAM will appear in

the main display.