Owner's Manual
29
You can design up to three CUSTOM programs.
To select a CUSTOM program, press the + and –
b
uttons beside the ENTER button. When you see
the CUSTOM program you want to design (PRO-
G
RAM1, PROGRAM 2, or PROGRAM 3), press
the ENTER button.
Note: If the CUSTOM program has not yet
been defined, only two rows of indicators will
appear in the matrix.
Next, enter a program time by pressing the + and
– buttons beside the ENTER button. Then, press
the ENTER button.
See the matrix. Each CUSTOM program is di-
vided into 30-second segments. One speed set-
ting can be programmed for each segment. The
speed setting for the first segment is shown in the
flashing column of the matrix.
Enter a maximum speed setting for the first seg-
ment of the program by pressing the QUICK-
TOUCH SPEED buttons and the + and – buttons
beside the ENTER button. Then, press the
ENTER button. Note: The maximum speed setting
will appear in the first column of the matrix.
Program a speed setting for the second segment
as described above.
Continue programming speed settings for the re-
maining columns. After you have entered the last
speed setting, the words CUSTOM PROGRAM
CREATED will appear in the main display. The
speed settings that you have programmed and the
n
umber of segments that you have programmed
will then be saved in memory and you will be re-
t
urned to the maintenance mode.
Press the ENTER button again and set the
delay time for the sleep timeout mode.
Any time that the treadmill is not used for several
minutes, the console will enter a sleep timeout
mode. To set the number of minutes before the
console will enter the sleep timeout mode, press
the + and – buttons above the ENTER button. The
delay time can be from 1 to 10 minutes.
Press the ENTER button again and enable or
disable the safety key.
To require the use of the safety key with the con-
sole, press the + or – button above the ENTER
button until the words SAFETY KEY ENABLED
appear in the main display. To allow the treadmill
to be used without the key, press the + or – button
until the words SAFETY KEY DISABLED appear.
If you have the Basic console, go to step 11. If
you have the Workout TV console, go to step
10.
9
8