Owner's Manual

ManualsBrandsFreeMotion ManualsHome GymsFreeMotion GZFW21851

Visit our website at

www.freemotionfitness.com

CAUTION

Read all precautions and instruc

tions in this manual before using

this equipment. Save this manual

for future reference.

Model No. GZFW2185.1

Serial No.

Write the serial number in the

space above for future reference.

QUESTIONS?

At FreeMotion Fitness, we are

committed to providing com-

plete customer satisfaction. If

you have questions, see HOW

TO CONTACT CUSTOMER

CARE on the back cover of this

manual.

HOW TO CONTACT CUSTOMER CARE

If you have questions after reading this manual, or if you require assistance, please contact Customer Care at

he address and phone number listed below. Please be prepared to give the following information:

•

The MODEL NUMBER of the product (GZFW2185.1).

• The NAME of the product (FREEMOTION EPIC PLATE LOADED LEG PRESS strength equipment).

• The SERIAL NUMBER of the product (see the front cover of this manual).

• When ordering replacement parts, please also give the KEY NUMBER and DESCRIPTION of the part(s) (see

the PART LIST and the EXPLODED DRAWING on pages 12 and 13 of this manual).

Customer Care: 1-800-201-2109, Monday–Friday, 8 a.m.–5 p.m. Mountain Time

FreeMotion Fitness, Inc. • 1096 Elkton Dr., Suite 600 • Colorado Springs, CO 80907

Serial Number Decal

OWNER’S

MANUAL

Summary of content (16 pages)

PAGE 1
HOW TO CONTACT CUSTOMER CARE If you have questions after reading this manual, or if you require assistance, please contact Customer Care at the address and phone number listed below. Please be prepared to give the following information: • The MODEL NUMBER of the product (GZFW2185.1). • The NAME of the product (FREEMOTION EPIC PLATE LOADED LEG PRESS strength equipment). • The SERIAL NUMBER of the product (see the front cover of this manual).
PAGE 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBLY . . . . . . . . . . . . .
PAGE 3
WARRANTY TERMS AND CONDITIONS Limited Warranty on Commercial Equipment FreeMotion Fitness, Inc. warrants that all new equipment will be free of manufacturing defects in workmanship and materials, becoming effective at the date of original installation. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only.
PAGE 4
WARNING DECAL PLACEMENT EXPLODED DRAWING—Model No. GZFW2185.1 31 32 The decals shown below have been placed on the strength equipment in the locations shown. If a decal is missing or illegible, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. Apply the decal in the location shown.
PAGE 5
PART LIST—Model No. GZFW2185.1 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 2 1 3 5 2 1 1 1 8 8 Description Key No. Qty.
PAGE 6
ASSEMBLY NOTES instructed to do otherwise. Make Things Easier for Yourself • As you assemble the strength equipment, make sure all parts are oriented as shown in the drawings. Everything in this manual is designed to ensure that the strength equipment can be assembled successfully by anyone. The following tools (not included) are required for assembly: Before beginning assembly, carefully read the following information and instructions: • An adjustable wrench • Assembly requires two people.
PAGE 7
MAINTENANCE It is important for safe and trouble-free operation of your FREEMOTION EPIC strength equipment to perform routine preventive maintenance on a regular basis. Instruct all personnel to perform equipment inspection and maintenance requirements. Personnel must record and report any accident. To maintain the strength equipment’s warranty, use only FREEMOTION EPIC parts for repair or replacement. For any questions or concerns, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. 3.
PAGE 8
6. Remove the indicated 3/8" x 3/8" Shoulder Bolt (52) from the Support Arm (7). ADJUSTMENTS Make sure that the 3/8" Nylon Washer (50) is between the Support Arm (7) and the Adjustment Arm (10), and that the 3/8" Bushing (51) is pressed into the Support Arm. Attach the Support Arm to the Adjustment Arm with the 3/8" x 3/8" Shoulder Bolt (52). This section explains how to adjust the strength equipment for exercising. Make sure all parts are properly tightened each time the strength equipment is used.
PAGE 9
6. Remove the indicated 3/8" x 3/8" Shoulder Bolt (52) from the Support Arm (7). ADJUSTMENTS Make sure that the 3/8" Nylon Washer (50) is between the Support Arm (7) and the Adjustment Arm (10), and that the 3/8" Bushing (51) is pressed into the Support Arm. Attach the Support Arm to the Adjustment Arm with the 3/8" x 3/8" Shoulder Bolt (52). This section explains how to adjust the strength equipment for exercising. Make sure all parts are properly tightened each time the strength equipment is used.
PAGE 10
MAINTENANCE It is important for safe and trouble-free operation of your FREEMOTION EPIC strength equipment to perform routine preventive maintenance on a regular basis. Instruct all personnel to perform equipment inspection and maintenance requirements. Personnel must record and report any accident. To maintain the strength equipment’s warranty, use only FREEMOTION EPIC parts for repair or replacement. For any questions or concerns, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. 3.
PAGE 11
ASSEMBLY NOTES instructed to do otherwise. Make Things Easier for Yourself • As you assemble the strength equipment, make sure all parts are oriented as shown in the drawings. Everything in this manual is designed to ensure that the strength equipment can be assembled successfully by anyone. The following tools (not included) are required for assembly: Before beginning assembly, carefully read the following information and instructions: • An adjustable wrench • Assembly requires two people.
PAGE 12
PART LIST—Model No. GZFW2185.1 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 2 1 3 5 2 1 1 1 8 8 Description Key No. Qty.
PAGE 13
WARNING DECAL PLACEMENT EXPLODED DRAWING—Model No. GZFW2185.1 31 32 The decals shown below have been placed on the strength equipment in the locations shown. If a decal is missing or illegible, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. Apply the decal in the location shown.
PAGE 14
WARRANTY TERMS AND CONDITIONS Limited Warranty on Commercial Equipment FreeMotion Fitness, Inc. warrants that all new equipment will be free of manufacturing defects in workmanship and materials, becoming effective at the date of original installation. Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only.
PAGE 15
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ASSEMBLY . . . . . . . . . . . . .
PAGE 16
HOW TO CONTACT CUSTOMER CARE If you have questions after reading this manual, or if you require assistance, please contact Customer Care at the address and phone number listed below. Please be prepared to give the following information: • The MODEL NUMBER of the product (GZFW2185.1). • The NAME of the product (FREEMOTION EPIC PLATE LOADED LEG PRESS strength equipment). • The SERIAL NUMBER of the product (see the front cover of this manual).