Owner's Manual

6
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the strength equipment, make
sure all parts are oriented as shown in the draw-
ings.
The following tools (not included) are required
for assembly:
• An adjustable wrench
• An Allen wrench
Assembly will be more convenient if you have a set
of open-end or closed-end wrenches or a set of
ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
t
hat the strength equipment can be assembled
successfully by anyone.
ASSEMBLY NOTES
1. Locate the following parts: the Right Base Leg
(20), the Left Base Leg (16), two Weight Bars
(13), two 1/2" x 2" Screws (40), two 1/2" Nylon
Locknuts (27), and two Bumper Rings (37).
1
20
16
13
27
37
40
2. Remove the two 1/2" x 2" Screws (40) from the
Seat Frame (2) and the Base (1). Lift the Seat
Frame off the Base.
Lower the Support Arm (7) to the position shown.
2
2
1
7
40
11