Owner's Manual

ManualsBrandsFreeMotion ManualsHome GymsFreeMotion GZFW21851

MAINTENANCE

It is important for safe and trouble-free operation of your FREEMOTION EPIC strength equipment to perform

routine preventive maintenance on a regular basis. Instruct all personnel to perform equipment inspection and

maintenance requirements. Personnel must record and report any accident. To maintain the strength equipment’s

warranty, use only FREEMOTION EPIC parts for repair or replacement. For any questions or concerns, see

OW TO CONTACT CUSTOMER CARE on the back cover of this manual.

SCHEDULED MAINTENANCE

DAILY

1. Upholstery—General cleaning:

• Wipe using a soft cloth dampened with a light

solution of mild soap and warm water.

• If necessary, use a soft bristle brush with the

cleaning solution.

• Rinse thoroughly using a soft cloth dampened

with clean water. Dry thoroughly.

2. Upholstery—Difficult stains:

• Spray the stain with a non-abrasive household

cleaner such as FORMULA 409

cleaner,

SIMPLE GREEN

, or a similar product.

• Rub the area gently and let it sit for a few min-

utes.

• Rinse thoroughly using a soft cloth dampened

with clean water. Dry thoroughly.

• Repeat if necessary using a soft bristle brush.

Optional method for difficult stains:

• Rub the area gently using a soft cloth damp-

ened with rubbing alcohol.

• Rinse thoroughly using a soft cloth dampened

with clean water. Dry thoroughly.

CAUTION: When using any cleaning product, try

it first in an inconspicuous place to ensure that

there is no damage to the material. Follow the

directions and adhere to the safety precautions of

the manufacturer of each cleaning product used.

FreeMotion Fitness and its vendors cannot be

held liable for damage or injuries resulting from

the use or misuse of cleaning products.

3. Frames:

• Wipe using a soft cloth dampened with a light

solution of mild soap and warm water. Rinse

thoroughly using a soft cloth dampened with

clean water. Dry thoroughly.

Important: Do not use abrasive cleaners

because they may scratch the equipment. Strong

cleaners and abrasives will damage decals. Use

caution around decals. Do not use solvents such

as lacquer thinner, kerosene, gasoline, or similar

liquids.

WEEKLY

1. Hardware:

• Check all nuts and bolts. Tighten them as

required.

Important: All FREEMOTION EPIC

cushions are fabricated using dense plywood

with tee-nuts installed for bolting to the equip-

ment framework. Because these tee-nuts are

held by the plywood, they will not withstand the

torque that standard nuts and bolts will.

Therefore, when tightening the cushion bolts,

turn them only until they are snug and the cush-

ion does not move or feel loose. Overtightening

may strip the tee-nuts from the plywood and

make it impossible to remove the cushion in the

future.

2. Grips:

• Check and replace as needed.

3. Wheels:

• Wheels should roll easily. Tighten or replace as

needed.

3. Orient the Seat Frame (2) as shown and set the

Seat Frame on the Base (1). Attach the Seat

rame to the Base with four 1/2" x 2" Screws (40)

and two 1/2" Nylon Locknuts (27).

4. Remove the two 3/8" x 3" Screws (39) from the

Left Base Leg (16). Attach the Left Base Leg to

the Base (1) with the two Screws.

Repeat this step with the Right Base Leg (20).

Remove the 1/2" x 2" Screw (40) from a Weight

Bar (13). Attach the Weight Bar to the Foot Plate

Frame (4) with the Screw. Slide a Bumper Ring

(37) onto the Weight Bar.

Repeat this step with the other Weight Bar (13).