Instructions / Assembly

17
56
16
52
4
9
O
115
97
17. Set the TV (97) face down on a soft surface to
avoid scratching the TV. Remove and save the
four M4 x 12mm Screws (115).
17
16. Remove the 5/16" Nut (9) and the 5/16" x 2 1/4"
Bolt (4) from the bracket on the Frame (52).
Align the upper end of the Storage Latch (56)
with the bracket on the Frame (52). Insert a
5/16" x 2 1/4" Bolt (4) through the bracket and
the Storage Latch. This will push a spacer (O)
out of the other end; discard the spacer.
Next, tighten the 5/16" Nut (9) onto the 5/16" x
2 1/4" Bolt (4). Do not overtighten the Nut; the
Storage Latch (56) must be able to pivot.
Lower the Frame (52) (see HOW TO LOWER
THE TREADMILL FOR USE on page 40).