Instructions / Assembly

27
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download
iFit workouts, and use several other features of
the console, you must be connected to a wireless
network. See HOW TO USE THE WIRELESS
NETWORK MODE on page 35 to connect the
console to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 32 and step 2 on page
34 and select the maintenance mode. Then,
see step 3 on page 34 and check for firmware
updates.
3. Calibrate the incline system.
See step 4 on page 35 and calibrate the incline
system of the treadmill.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit button.
Note: For information about navigating in the
browser, see page 34. The browser will open to
the iFit.com home page. Follow the prompts on the
website to sign up for your iFit membership. If you
have an activation code, select the code activation
option.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 27. To use
an onboard workout, see page 29. To use a
set-a-goal workout, see page 30. To use an iFit
workout, see page 31.
To use the equipment settings mode, see page
32. To use the sound system, see page 34. To
use the Internet browser, see page 34. To use the
maintenance mode, see page 34. To use the wire-
less network mode, see page 35.
To operate the digital TV, see page 36. To use
the entertainment mode, see page 37. To use the
remote control, see page 37. To adjust the TV set-
tings, see page 38. To troubleshoot the digital TV,
see page 43.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 42).
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
26. Note: It may take a minute for the console
to be ready for use.
2. Select the main menu.
When you turn on the power, the main menu will
appear after the console boots up. Touch the home
button in the lower-left corner of the screen (not
shown here) to return to the main menu at any
time.