Owner's Manual

11. If necessary, move the treadmill to the desired
location (see HOW TO MOVE THE TREADMILL
on page 25).
After the treadmill is placed in the location where
it will be used, make sure that the Leveling Feet
(64) rest firmly on the floor. If the treadmill rocks
even slightly, loosen one of the 1/2" Nuts (36)
on a Leveling Foot, turn the Leveling Foot clock-
wise or counterclockwise until the rocking mo-
tion is eliminated, and then retighten the Nut.
64
11
12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see page 27).
36
10. Tighten two #8 x 1/2" Machine Screws (4) into
the bottom of the handrail assembly. Be careful
not to overtighten the Machine Screws.
See step 9. Tighten the six #8 x 2 1/4" Machine
Screws (3). Be careful not to overtighten the
Machine Screws.
10
Handrail
Assembly
4
4
11
3
9
Handrail
Assembly
86
3
9
. Remove the packaging from the Handrail Cover
(86).
Attach the Handrail Cover (86) to the handrail
a
ssembly with six #8 x 2 1/4" Machine Screws
(3). Start all six Machine Screws but do not
tighten them yet. Start the indicated Machine
Screws first.
F
irst
First