Owner's Manual

25
HOW TO MOVE THE TREADMILL
D
ue to the size and weight of the treadmill, moving it requires two or three persons.
Before moving the treadmill, plug in the power cord and insert the key into the console (see step 1 on page 15).
Raise the incline to the highest position (see step 4 on page 16). Then, remove the key and unplug the power
cord.
Hold the handle firmly in the location shown at the
right. CAUTION: To decrease the possibility of dam-
age to the treadmill or of injury, do not lift the tread-
mill by the handrail. Carefully roll the treadmill on the
wheels to the desired location and then lower it to the
level position. CAUTION: To reduce the risk of injury,
use extreme caution while moving the treadmill. Do
not attempt to move the treadmill over uneven sur-
faces.
After the treadmill is placed in the location where it will
be used, make sure that the leveling feet rest firmly on
the floor. If the treadmill rocks even slightly, loosen one
of the nuts on a leveling foot, turn the leveling foot
clockwise or counterclockwise until the rocking motion is
eliminated, and retighten the nut.
Handle
Wheels
Leveling Feet
Nuts