Owner's Manual

M6 x 20mm

Screw (68)–4

M6 x 13mm

Screw (84)–2

M8 Locknut

(54)–2

M8 x 20mm

Screw (60)–8

M8 x 32mm

Screw (63)–2

M8 x 60mm

Screw (88)–2

M4 x 15mm

Screw (52)–4

M8 x 30mm Screw

(65)–4

ASSEMBLY

ssembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver , an adjustable

rench , and a rubber mallet .

As you assemble the elliptical, use the drawings below to identify small parts. The number in parentheses below

each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-

lowing the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check

to see if it has been preassembled.