Instructions / Assembly

9. Pull the Seat Handle (15) upward, slide the Seat

(12) toward the rear of the exercise bike until it

stops, and then release the Seat Handle.

Then, attach the Backrest Frame (14) to the Seat

Frame (18) with four M6 x 35mm Screws (95);

start all the Screws, and then tighten them.

8. Tip: Avoid pinching the wires. Attach the

Console Cover (46) to the Handlebar (47) with

four M5 x 10mm Screws (89); start all the

Screws, and then tighten them.

See step 5. Tighten the two M5 x 10mm Screws

(89) and the two M5 x 30mm Screws (88).

Avoid pinching

the wires